Expandable at any time thanks to modular system
Gruber chain elevator
The Gruber chain elevator is suitable for vertical transport of all types of grain, maize, beans, peas, dry and wet maize and other free-flowing goods.
The chain elevator is used for small to medium conveying capacities of 15 to 40 t/h.
The Gruber chain elevator can not only transport vertically but also at an angle, for example along a sloping roof. This can save subsequent conveyor equipment (lengths).
The Gruber chain elevator differs from other manufacturers by its extremely stable construction of elevator foot, elevator head and driver chain.
The following types are available:
- Gruber chain elevator KE 20, approx. 20 t/h
- Gruber chain elevator KE 30, approx. 30 t/h
- Gruber chain elevator KE 40, approx. 40 t/h
The standard version (basic element) contains the following equipment:
- Elevator foot with feeder wing
- Shaft with inspection hatch
- 3 running metre chain
- Head with outlet and cpl. Motor attachment
- Total height 4m.
KE 20 – version with angle piece possible (not available for KE 30 and KE 40!).
Gruber KE 20 chain elevators can also be equipped with a deflection station (e.g. conveying along the slope of the roof).
Angle is either: 45°, 50°, 55° or 60°.
|F||280 x 135||280 x 135||280 x 135||280 x 135|
|G||330 x 185||330 x 185||330 x 185||330 x 185|
- Versatile use possible
For vertical and inclined conveying of all types of grain, peas, beans, dry and wet maize and other free-flowing goods.
- Available in 3 variants
Capacity: max 20, 30 or 40 t/h.
- High material quality
Shaft lengths: 0.125 / 0.25 / 0.5 / 0.75 / 1.0 / 2.0 / 2.5 / 3.0 m long fully galvanised design without welds.
- Modular system
Expandable at any time.
- Gentle material acceptance
- Quality steel chain
- Rubber hitch
Made of high quality fabric material.
- Reduced grain breakage
Punched two-piece sprocket in the elevator foot reduces grain breakage to a minimum.
- Adaptable to environment
Ex. structural conditions.
- Elevator foot lockable
Elevator foot can be shut off 100% (by means of a shut-off gate for pointed troughs or with inlet regulation for side augers), therefore complete emptying of the elevator is possible – even when the reception pit is full.
- Working on roof slopes
Angle piece for delivery along the roof slope (only type KE 20).
For side auger.
- Inlet hopper and inlet regulation
For pointed gutters.
|Techn. Data in mm||KE-20||KE-30||KE-40|
|F||125 – 3000||125 – 3000||125 – 3000|
|M||500 – 8000||500 – 8000||500 – 8000|