The powerful hammer mill for grinding wet maize up to 45% humidity
Gruber corn mill PROFI in hammer design
The exceptional performance and quality of the Gruber wet corn mill series PROFI is based on 55 years of experience in mill construction.
The PROFI maize mill is also available as a universal version – type U – which can also be used to grind dry or wet grain. Screen perforations between 3mm and 16mm are available for this type.
Gruber maize mills have a patented inlet chute (no “grain bounce” possible) through which the wet maize passes to the stable beater rotor. The steel sieve of the maize mill takes over the sizing. The ground material is then ejected by means of a stable fan, supported by an additional air inlet.
Maize mill types:
- PROFI 480M with tractor transmission – 120 kW, 1000 rpm and hydraulic attachment
- PROFI 480M with bearing bracket without drive flange /for truck engine direct drive)
- PROFI 480U with tractor transmission – 120 kW, 1000 rpm and hydraulic attachment
- PROFI 480U with bearing bracket without drive flange /for truck engine direct drive)
- PROFI 600M with tractor transmission – 133 kW, 1000 rpm and hydraulic attachment
- PROFI 600M with tractor transmission – 250 kW, 1000 rpm and hydraulic attachment
- PROFI 600M with bearing bracket without drive flange /for truck engine direct drive)
- PROFI 600U with tractor transmission – 133 kW, 1000 rpm and hydraulic attachment
- PROFI 600U with tractor transmission – 250 kW, 1000 rpm and hydraulic attachment
- PROFI 600U with bearing bracket without drive flange /for truck engine direct drive)
- PROFI 800M with tractor transmission – 400 kW, 1000 rpm and hydraulic attachment
- PROFI 800M with bearing bracket without drive flange /for truck engine direct drive)
Exceptional hourly output, trouble-free grinding and the best regrind thanks to a design with 44 mill hammers (Profi 480 and Profi 600) or 84 mill hammers (Profi 800). Sturdy, hardened sieves and mill hammers guarantee a long service life.
The mills type Profi 480U and Profi 600U are also suitable for milling wet and dry cereals (special sieve sizes available).
Sieve selection depending on humidity:
30-34%…..sieve 6 – 8mm / 35-39%…..sieve 10 – 12mm / 40-45%…..sieve 14 – 16mm
- High performance with low power requirement
- low-wear tools
- Smooth running, as statically and dynamically balanced
| Dimensions in mm | PROFI 480 M/U | PROFI 600 M/U |
| A | 1240 | 1240 |
| B | 950 | 1010 |
| C | 1440 | 1550 |
| D | 160 | 160 |
| E | 420 | 480 |
| F | 1120 | 1120 |
| Dimensions in mm | PROFI 800 M |
| A | 1585 |
| B | 1300 |
| C | 1810 |
| D | 200 |
| E | 600 |
| F | 1270 |
